Skip to main content

In solid wood panels, individual softwood lamellae are sorted, planed, and assembled into multi-layered boards consisting of parallel outer layers and at least one core layer perpendicular to the orientation of the outer layers. Adhesive is used to bond the lamellae. Thus swelling and shrinkage due to climatic changes is minimal. Solid wood panels have a symmetric lay-up and the thickness of the outer layers is recommended to be at least 5 mm to fulfil the requirements for loadbearing structural timber components. No open joints are allowed in the core layer.

 

 

 

Details of sustainability rating (basis tdry mass)

Solid wood panel//PF/3 layer, 540 kg/m³

OI3
 
GWP
[kg CO2 Äqv.]
AP
[kg SO2 Äqv.]
PEI ne
[MJ]
PEI e
[MJ]
EP
[kg PO4 Äqv.]
POCP
[kg C2H4 Äqv.]
727,6 -1.027,8 4,5 10.055,5 20.925,9 0,8 1,0

Manufacturer

According to EN 13353 and EN 13986

Product Manufacturer Additional info
binderholz Dreischichtplatte MULTISTAT (SWP/2 oder 3 L3 für den Nenndickenbereich 12-60 mm) Binderholz GmbH Holzindustrie DoP (1,007 KB)
binderholz Fünfschichtplatte MULTISTAT (SWP/2 oder 3 L5 für den Nenndickenbereich 35-55 mm) Binderholz GmbH Holzindustrie DoP (1,007 KB)
K1-Multiplan Mayr-Melnhof Holz Reuthe GmbH DoP (1 MB)
Nordpan Dreischichtplatte (SWP/2 L3 für den Nenndickenbereich 13-49 mm) Nordpan AG DoP (362 KB)
Nordpan Fünfschichtplatte (SWP/1 L5 und SWP2/L5 für den Nenndickenbereich 27 bis 42 mm) Nordpan AG DoP (723 KB)

letzte Änderung