Dieses Bauteil bzw. diese Bauteilvariante ist nicht für den deutschen Gültigkeitsbereich zulässig.
external wall solid wood construction, ventilated, without dry lining, with cladding
Fire performance |
REI
from inside
REI from outside |
60
60 |
---|---|---|
maximum ceiling height = 3 m; maximum load Ed,fi = 35,0 kN/m
Classified by HFA
|
||
Thermal performance | U | 0,15 W/(m2K) |
Diffusion | adequate | |
Calculated by HFA
|
||
Acoustic performance | Rw (C;Ctr) | 43 dB |
Ln,w (Cl) | ||
Rating by TU-GRAZ
|
||
Mass per unit area | m | 96,9 kg/m2 |
Calculation based on gypsum plaster board type DF GKF
|
data sheet external wall
awmoho05a-02 (pdf, 250 KB)
Cross laminated timber:
Variation 00-01: d ≥ 94,0; at least 3-layers, top layer at least 30mm; variation 02: d ≥ 85,0; at least 5-layers, top layer at least 17 mm
Thickness [mm] | Building material | Thermal performance | Reaction to fireklasse EN | ||||
---|---|---|---|---|---|---|---|
λ | μ min – max | ρ | c | ||||
A | 20,0 | larch wood external wall cladding | 0,155 | 150 | 600 | 1,600 | D |
B | 30,0 | spruce wood battens | 0,120 | 50 | 450 | 1,600 | D |
C | vapour-permeable membrane sd ≤ 0,3m | ||||||
D | 12,5 | gypsum fibre board | 0,320 | 21 | 1000 | 1,100 | A2 |
E | 200,0 | mineral wool [035; 130; ≥1000°C] | 0,035 | 1 | 130 | 1,030 | A1 |
F | 90,0 | cross laminated timber | 0,130 | 50 | 500 | 1,600 | D |
G | 12,5 | gypsum plaster board type DF / gypsum fibre board | 0,250 | 10 | 800 | 1,050 | A2 |
Global warming potential | Share of renewable Primary Energy | Resources | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lifecycle Phase |
GWP-F [kgCO2Äqv.] |
GWP-B [kgCO2Äqv.] |
GWP-T [kgCO2Äqv.] |
PERE [MJ] |
PERM [MJ] |
PERT [MJ] |
PENRE [MJ] |
PENRM [MJ] |
PENRT [MJ] |
AP [kgSO2Äqv.] |
EP [kgPO4Äqv.] |
ODP [kgR11Äqv.] |
POCP [kgEthenÄqv.] |
A1 - A3 | 69,931 | -82,248 | -12,317 | 95,676 | 782,074 | 877,750 | 924,761 | 21,007 | 945,768 | 0,436 | 0,123 | 4.0793605E-6 | 0,131 |
Last update 02.08.2023/nu.ge