Dieses Bauteil bzw. diese Bauteilvariante ist nicht für den deutschen Gültigkeitsbereich zulässig.
intermediate floor timber frame construction, suspended, wet, with filling
Fire performance | REI | 30 |
---|---|---|
maximum span = 5 m; maximum load Ed,fi = 2,62 kN/m²
Classified by HFA
|
||
Thermal performance | U | 0,25 W/(m2K) |
Diffusion | adequate | |
Calculated by HFA
|
||
Acoustic performance | Rw (C;Ctr) | 67 dB (-9; -18) |
Ln,w (Cl) | 50 dB (6) | |
Rating by TGM
|
||
Mass per unit area | ||
Thickness [mm] | Building material | Thermal performance | Reaction to fireklasse EN | ||||
---|---|---|---|---|---|---|---|
λ | μ min – max | ρ | c | ||||
A | 50,0 | anhydrite screed or cement screed | 0,700 | 10 | 2200 | 1,300 | A1 |
B | plastic separation layer | 0,200 | 100000 | 1400 | 1,400 | E | |
C | 30,0 | impact sound absorbing subflooring MW-T | 0,035 | 1 | 68 | 1,030 | A1 |
D | 40,0 | fill | 0,700 | 1 | 1800 | 1,000 | A1 |
E | trickling protection | E | |||||
F | 18,0 | OSB | 0,130 | 200 | 600 | 1,700 | D |
G | 200,0 | construction timber (80/..; e=*) | 0,120 | 50 | 450 | 1,600 | D |
H | 100,0 | mineral wool [040; ≥16; <1000°C] | 0,040 | 1 | 16 | 1,030 | A1 |
I | 12,0 | OSB | 0,130 | 200 | 600 | 1,700 | D |
J | 27,0 | resilient channel | |||||
K | 12,5 | gypsum plaster board type DF or | 0,250 | 10 | 800 | 1,050 | A2 |
K | 12,5 | gypsum fibre board | 0,320 | 21 | 1000 | 1,100 | A2 |
Global warming potential | Share of renewable Primary Energy | Resources | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lifecycle Phase |
GWP-F [kgCO2Äqv.] |
GWP-B [kgCO2Äqv.] |
GWP-T [kgCO2Äqv.] |
PERE [MJ] |
PERM [MJ] |
PERT [MJ] |
PENRE [MJ] |
PENRM [MJ] |
PENRT [MJ] |
AP [kgSO2Äqv.] |
EP [kgPO4Äqv.] |
ODP [kgR11Äqv.] |
POCP [kgEthenÄqv.] |
A1 - A3 | 41,237 | -48,741 | -7,504 | 119,715 | 502,666 | 622,380 | 589,334 | 29,327 | 618,660 | 0,169 | 0,080 | 2.8740231E-6 | 0,030 |
Last update 02.08.2023/hfa.eco2soft