Dieses Bauteil bzw. diese Bauteilvariante ist nicht für den deutschen Gültigkeitsbereich zulässig.
intermediate floor timber frame construction, suspended, wet, without filling
Fire performance | REI | 60 |
---|---|---|
maximum span = 5 m; maximum load Ed,fi = 3,66 kN/m² (without floor construction and 12mm OSB; with ceiling beam 80/200)
Classified by IBS Classified by HFA
|
||
Thermal performance | U | 0,26 W/(m2K) |
Diffusion | adequate | |
Acoustic performance | Rw (C;Ctr) | 55 dB (-2; -8) |
Ln,w (Cl) | 65 dB (0) | |
Assessed by TGM
|
||
Mass per unit area | m | 169,4 kg/m2 |
Calculation based on gypsum plaster board type DF GKF
|
Thickness [mm] | Building material | Thermal performance | Reaction to fireklasse EN | ||||
---|---|---|---|---|---|---|---|
λ | μ min – max | ρ | c | ||||
A | 50,0 | anhydrite screed or cement screed | 0,700 | 10 | 2200 | 1,300 | A1 |
B | plastic separation layer | 0,200 | 100000 | 1400 | 1,400 | E | |
C | 30,0 | impact sound absorbing subflooring EPS-T | 0,040 | 20-50 | 11 | 1,450 | E |
D | 18,0 | OSB | 0,130 | 200 | 600 | 1,700 | D |
E | 220,0 | construction timber (80/..; e=625) | 0,120 | 50 | 450 | 1,600 | D |
F | 100,0 | mineral wool [040; ≥16; <1000°C] | 0,040 | 1 | 16 | 1,030 | A1 |
G | 12,0 | OSB | 0,130 | 200 | 600 | 1,700 | D |
H | 27,0 | resilient channel | |||||
I | 25,0 | gypsum plaster board type DF (2x12,5 mm) or | 0,250 | 10 | 800 | 1,050 | A2 |
I | 25,0 | gypsum fibre board (2x12,5 mm) | 0,320 | 21 | 1000 | 1,100 | A2 |
Global warming potential | Share of renewable Primary Energy | Resources | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lifecycle Phase |
GWP-F [kgCO2Äqv.] |
GWP-B [kgCO2Äqv.] |
GWP-T [kgCO2Äqv.] |
PERE [MJ] |
PERM [MJ] |
PERT [MJ] |
PENRE [MJ] |
PENRM [MJ] |
PENRT [MJ] |
AP [kgSO2Äqv.] |
EP [kgPO4Äqv.] |
ODP [kgR11Äqv.] |
POCP [kgEthenÄqv.] |
A1 - A3 | 38,700 | -51,096 | -12,396 | 120,704 | 523,630 | 644,334 | 532,273 | 38,704 | 570,978 | 0,140 | 0,066 | 2.5374095E-6 | 0,029 |
Last update 02.08.2023/nu.ge