Skip to main content
dataholz.eu
Regional validity

Scope

Geprüftes/zugelassenes Bauteil

internal wall iwrxxo12a-04

internal wall timber frame construction, without dry lining, other surface

Building physical assessment

Fire performance REI 60
maximum ceiling height = 3 m; maximum load Ed,fi = 23,4 kN/m  
Classified by HFA  
Thermal performance U
Diffusion
Acoustic performance Rw (C;Ctr) 39 dB
Ln,w (Cl)
The acoustic insulation assessment is based on a length-related flow resistance of r≥5 kPa.s/m². If this value is lower for the insulation material used, the Rw value is reduced by 3dB.  
Rating by TGM  
Mass per unit area m 36,3 kg/m2
 

Datenblatt internal wall
iwrxxo12a-04 (pdf, 250 KB)

Note

The fire resistance is only valid when wall is used as partition with only one side exposed to fire.

timber frame construction
Cross-section of standard configuration

timber frame construction
Standard configuration

Register of building materials used for this application, cross-section (from outside to inside)

Thickness [mm] Building material Thermal performance Reaction to fire­
λ μ min – max ρ c
A 12,5 Rigips Riduro 0,250 4-10 1000 1,050 A2
B 120,0 construction timber (60/..; e=625) 0,120 50 450 1,600 D
C 120,0 Cellulose fibre [040; 50] 0,040 1 50 2,000 E
D 12,5 Rigips Riduro 0,250 4-10 1000 1,050 A2

Ecological rating (per m2 construction area)

Database ecoinvent

ΔOI3 9,0
Calculated by IBO  

Resources
Lifecycle
Phase		 GWP
[kg CO2 Äqv.]		 AP
[kg SO2 Äqv.]		 EP
[kg PO4 Äqv.]		 ODP
[kg R11 Äqv.]		 POCP
[kg Ethen Äqv.]		 PERE
[MJ]		 PERM
[MJ]		 PERT
[MJ]		 PENRE
[MJ]		 PENRM
[MJ]		 PENRT
[MJ]
A1 - A3 -6,320 0,037 0,016 1,03e-6 0,006 17,600 170,000 187,600 144,000 0,407 144,407

Source: Saint-Gobain Rigips Austria GesmbH

Last update 06.08.2020/hfa.plb